Sodatide Batch Verify: Check a Genuine Bottle
To check a genuine Sodatide bottle, compare it with the label photo, make sure the safety seal is whole, read the lot code on the base if shown, and call the order desk to match your order. The lot SOD-26/SO-3444 and CoA SOD-3444-26-SO references are draft labels, not lab proof. No lab report is published.
What do the Sodatide lot and CoA numbers mean?
The Sodatide lot reference is SOD-26/SO-3444 and the CoA reference is SOD-3444-26-SO. Both are draft labels from the product brief, not lab proof.
A CoA, or certificate of analysis, is normally a lab report on one batch. No such report for this product has been published, so the reference is a name without a document behind it yet.
| Reference | Value | Status | What it proves |
|---|---|---|---|
| Lot | SOD-26/SO-3444 | Draft label | Nothing on its own |
| CoA | SOD-3444-26-SO | Draft label | Nothing yet: no report is published |
| Best-before | Format not published | Unknown | Check the base of your bottle |
Where to look on a Sodatide bottle
Look at the base of the Sodatide bottle for the lot code and best-before date, when the bottle shows them. Then turn it to read the front and back label.
The best-before format is not published. So we cannot tell you what a correct date should look like. If your base is blank, that is a question for the order desk.
Three places to check
- Base: lot code and best-before date, if printed
- Cap and neck: the safety seal under the cap
- Label: the Supplement Facts panel and the distributor line
How to check a genuine Sodatide bottle
To check a genuine Sodatide bottle, compare the label with the photos on this site, then check the seal, the lot and your order. Four steps cover it.
Run these checks before the first capsule. They take about five minutes.
Compare the label photo
Hold your bottle next to the label image below. The amounts should read 211 mg, 100 mg and 36 mg, with 30 capsules per bottle.
Check the safety seal
Look under the cap. The label says: do not use if safety seal is damaged or missing.
Check the lot
Find the lot code on the base, if the bottle shows one. Write it down with the best-before date.
Call to match your order
Phone the order desk with your order ID and the lot code. The desk can match the bottle to your order.
What the genuine Sodatide label shows
A genuine Sodatide label lists three active ingredients with exact amounts and three claims with asterisks. Every part below should match your bottle word for word.
| Label part | What it should say |
|---|---|
| Top line | Advanced Metabolic Science |
| Serving | 1 Capsule, 30 servings per container |
| Actives | Chicory root inulin 211 mg, potato resistant starch 100 mg, probiotic blend 36 mg |
| Other ingredients | Hypromellose (vegetarian capsule), microcrystalline cellulose, magnesium stearate, silica. |
| Distributor | Instituto Experience, Lakeland FL, 33804 |
| Origin | Made in the USA with globally sourced ingredients |
| Warning line | Keep out of the reach of children. The label says not to use the bottle if its safety seal is broken or absent. Store in a cool, dry place. |
The full panel, line by line, is on the supplement facts page.
How to check the Sodatide safety seal
The Sodatide safety seal sits under the cap and should be whole when the bottle arrives. The label is direct about it: do not use if the safety seal is damaged or missing.
A torn, lifted or missing seal means you cannot be sure what is inside. Set that bottle aside.
Intact
The seal covers the whole opening with no tears or lifted edges. Fine to use.
Damaged
Torn, punctured or peeling. Do not use it. Call the desk.
Missing
No seal under the cap at all. Do not use it. Call the desk.
Signs a Sodatide bottle or seller may not be genuine
The biggest Sodatide red flags are a label that does not match, a broken seal, and a seller who cannot look up your order. Any one of them is reason to stop and check.
Each sign has a simple next step, and most start with a call to the desk.
| Red flag | Why it matters | What to do |
|---|---|---|
| Amounts differ from 211 / 100 / 36 mg | The formula on the label is fixed | Do not use it. Call the desk |
| Safety seal damaged or missing | The label says not to use it | Set it aside and call the desk |
| No distributor line | Genuine labels name Instituto Experience, Lakeland FL, 33804 | Compare with the label image |
| “FDA approved” on the pack or ad | The FDA does not approve supplements before sale (FDA, 2022) | Treat the seller with caution |
| Weight-loss or cure promises | The label makes no such claims | Buy from this site instead |
| Seller cannot give an order ID | No way to match or refund the order | Ask for one before you pay |
| Capsule count is not 30 | Each bottle holds 30 capsules | Call the desk with a photo |
How the Sodatide order desk matches your bottle
The Sodatide order desk matches a bottle by looking up your order ID. Give them the lot code from the base as well, if your bottle shows one.
The number is in the site footer. The desk handles orders, tracking, changes and refunds for purchases placed through this site.
Have these ready
- Your order ID from the order email
- The lot code and best-before date, if printed
- A photo of the label and the seal
- What looked wrong, in one or two sentences
Bought from a marketplace? The desk may not see that order. Our where to buy page explains why genuine stock matters.
What to do if your Sodatide bottle looks wrong
If your Sodatide bottle looks wrong, do not take any capsules from it. Keep the bottle, take photos and call the order desk.
If the order was placed here, you still have the 60-day money-back window from your purchase date.
- Stop using the bottle and keep it sealed in a bag.
- Photograph the label, base, cap and seal.
- Call the order desk with your order ID.
- Follow the desk’s steps for a swap or refund.
Refund steps and timing are on the guarantee page.
What a Sodatide batch check cannot tell you
A Sodatide batch check tells you the bottle looks right and matches an order. It cannot tell you what is inside each capsule.
Only a lab test can measure contents. Since no lab report is published, a few questions stay open no matter how carefully you check.
| Question | Can a home check answer it? |
|---|---|
| Is the label the genuine design? | Yes, by comparing it with the label image |
| Is the seal intact? | Yes, by looking under the cap |
| Was this bottle sold through this site? | Yes, through the order desk and your order ID |
| How many live bacteria are in the blend? | No. The CFU count is not published |
| Do the capsules hold the printed amounts? | No. That needs a lab report |
Why Sodatide has no public lab report yet
Sodatide has no independent lab report published at this time. That is why the lot and CoA references stay labeled as drafts on every page.
A published report would name the lab, the batch and the tests. When one is available, we will link it here and move the updated date.
What the seals on the pack do and do not mean is covered on the testing and quality page.
Sodatide batch checks: common questions
Is lot SOD-26/SO-3444 proof that my Sodatide bottle was lab tested?
No. The lot and CoA references are draft labels supplied with the product brief. They are not a lab report, and no independent lab report is published.
Where is the Sodatide lot number printed?
Check the base of the bottle. Where the bottle shows a lot code and best-before date, that is where they are printed.
What does the best-before date on Sodatide look like?
The best-before format is not published. If you cannot find a date, call the order desk and ask.
What should I do if the Sodatide safety seal is broken?
Do not use the bottle. The label says not to use it if the safety seal is damaged or missing. Call the order desk with your order ID.
Can the order desk confirm my Sodatide bottle is genuine?
The desk can match your bottle to an order placed through this site. Have your order ID ready.
Are Sodatide bottles on marketplaces genuine?
We cannot confirm stock sold by third-party listings. The order desk can only match orders it handled.
